FS electromagnetic characterisation of a flexible and scalable X-band RAM

Aguirre, A., De Pedro, C. T., Gallardo, B. P., Martínez, D. P., Bocanegra, D. E. 2018. FS electromagnetic characterisation of a flexible and scalable X-band RAM. IET Microwaves Antennas and Propagation 12, 7, 1147-1152 DOI: 10.1049/iet-map.2017.0482

Along the years, RADAR absorbing materials (RAM’s) have been widely introduced in aeronautic applications and platforms. However, this kind of materials presents three main problems for certain applications when they are intended to be used in real operations. First, they must be scalable from a laboratory sample to actual size, at a reasonable cost. Second, they must be able to work without metal backing for applications in non-metallic vehicles or other objects which surface might not be flat. Indeed, they should also be flexible and surface adaptable. Finally, their absorbing properties against electromagnetic fields should be preferably characterised under real conditions, that is, in free space (FS), in order to design and fabricate an appropriate material for the intended application. In this study, a self-developed, low-cost, bilayer, X-band RAM, composed of a lower layer of polyaniline silicon rubber and a top layer of silicon rubber with graphite was characterised in a bistatic anechoic chamber called BIANCHA, and the results are presented, analysed and compared with software simulation and with the typical single polarisation waveguide measurement method, showing the adequacy of FS measurements for the development of this type of RAM.

Otras publicaciones